CR130 950W HIGH-PERFORMANCE FAN HEATER

CR130 950W HIGH-PERFORMANCE FAN HEATER

• specifications
• pdf download

• • Compact design
  • Double insulated
  • Integrated thermostat or hygrostat
  • Optional clip or screw fixing

  The compact CR 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an integrated thermostat for temperature control or a pre-set hygrostat for humidity control. The CR 130 was designed as a stationary unit for panel or DIN rail mounting. For foot mounting on the bottom of an enclosure, the CR 030 fan heater is recommended.

  Technical Data

  Heating element	High performance caridge
  Temperature safety cut-out	to protect against overheating in case of fan failure
  Heater body	extruded aluminium profile
  Axial fan, ball bearing	air flow 160m3/h, free flow(service life 50,000h at 25°C(77°F)
  Connection	2-pole clamp max.2.5mm2,clamping screw with stain relief, toque 0.8Nm max.
  Casing	plastic according to UI94V-O, black
  Mounting	clip for 35mm DIN rail, EN50022 or screw fixing(M6)
  Fitting position	horizontal
  Operating/Storage temperature	-45 TO +70 °C(-49 to +158 °F)
  Portection type/protection class	IP20/II(double insulated)
  Note	other heating capacities from 200w up available on request

  

  Art. No.	Heating capacity	Operating    voltage	Model	Setting range 1)
  13051.0-00	950W	230VAC,50/60Hz	Fan Heater with thermostat	0 to + 60°C
  13051.0-02	950W	230VAC,50/60Hz	Fan Heater with hygrostat	65% RH,factory-set
  13059.9-00	950W	120VAC,50/60Hz	Fan Heater with thermostat	+32 to +140°C

  1)Switching difference 12.6 °F ± 7 °F tolerance (7 K ± 4 K)

  

• [download id=”139″ format=”1″]

If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.