CS 060 50W TO 150W TOUCH-SAFE PTC HEATERS
- Low surface temperature
- Quick mounting due to clip fixing
- Wide voltage range
- Double insulated(plastic)
- Small size
The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air. The surface temperatures on the accessible side surfaces of the housing are minimized as a result of the heater design. The CS 060 is also available in a version with a plug-in thermostat requiring no additional wiring (CSF 060).
Surface element <80°C(176°F), except upper protective grille Heating capacity see table Heating element PTC resistor, self regulating and temperature limiting Heater body extruded aluminium profile, anodised Connection casing 4-pole terminal 2.5mm2, torque 0.8Nm max. Casing plastic according to UI94V-O, black Mounting clip for 35mm DIN rail, EN50022 Fitting position vertical Operating/Storage temperature -45 TO +70 °C(-49 to +158 °F) Portection type/protection class IP20/II(double insulated) Note other voltages on request Art. No. Heating capacity 1) Operating voltage 2) Inrush current max. Air outlet temperature 3) Dimensions Weight (approx.) 06000.0-00 50W 120-240V AC/DC 2.5A +86°C(186.8°F) 110*60*90mm 0.30kg 06010.0-00 100W 120-240V AC/DC 4.5A +120°C(248°F) 110*60*90mm 0.30kg 06020.0-00 150W 120-240V AC/DC 8A +145°C(293°F) 150*60*90mm 0.50kg
1) at 20°C (68F°) anbient temperatute
2) (mim. 110V, max 265V) Operating with voltages below 140V AC/DC reduces heating perfomance by appox. 10%.
3) measured 50mm above protective grille.
- [download id=”130″ format=”1″]
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.