EFR012 ELECTRONIC HYGROSTAT
- Adjustable and pre-set relative humidity
- Optical operating display(LED)
- High switching capacity
- Clip fixing
The EFR012 electronic hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure. The integrated LED is lit when the connected device is in operation.
Switch difference 5 %RH (± 1 % tolerance) – at 77 °F (25 °C) and 50 %RH Reaction time approx. 5 second. Contact type change-over contact(relay) Service life <150,000 cycles Max. Switching capapcity(relay output) 240V AC,8(1.6)A 120VAC,8(1.6)A 24VDC,4A EMN acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 Connection 5-pole terminal, clamping torque 0.5Nm max., rigid wire 2.5mm²stranded wire(with wire end ferrule) 1.5mm² Mounting clip for 35mm DIN rail, EN50022 Casing plastic according to UL94 V-0, light grey Dimensions 64.5 x 42 x 38mm Fitting position variable Operating/Storage temperature +32 to +140 °F (0 to +60 °C) / -4 to +176 °F (-20 to +80 °C) Protection type IP20 MAX. storage humidity 90% RH(without condensation) Optical indicator LED Art. No. Setting range Operating voltage 01245.0-00 230VAC, 50/60Hz 40 to 90% RH 01246.0-00 230VAC, 50/60Hz 65% RH pre-set 01245.9-00 120VAC, 50/60Hz 40 to 90% RH 01246.9-00 120VAC, 50/60Hz 65% RH pre-set
- [download id=”154″ format=”1″]
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.