CS130 1200W COMPACT FAN HEATER
- Compact design
- High heating performance
- Double insulated
- Integrated thermostat(optional)
- Optional clip or screw fixing
The compact CS 130 high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures. This fan heater is available with an optional integrated thermostat for temperature control. The CS 130 was designed as a stationary unit for panel or DIN rail mounting. For foot mounting on the bottom of an enclosure, the CS 030 fan heater is recommended.
Heating element PTC resistor – temperaturer limiting Temperature safety cut-out to protect against overheating in case of fan failure Heater body Axial fan, ball bearing air flow 160m3/h, free flow(service life 50,000h at 25°C(77°F) Connection 2-pole clamp amx.2.5mm2,clamping screw with stain relief, torque 0.8Nm max. Casing plastic according to UI94V-O, black Mounting Clip for 35mm DIN rail, EN 50022 or screw fixing(M6) Fitting position horizontal Operating/Storage temperature -45 TO +70 °C(-49 to +158 °F) Portection type/protection class IP20/II(double insulated) Note Art. No. Heating capacity 1) Operating voltage 2) Model Inrush current max. Setting range 13060.0-00 1,200W 230VAC,50/60Hz Fan Heater with thermostat 13A 0 to + 60°C 13060.0-01 1,200W 230VAC,50/60Hz Fan Heater without thermostat 13A – 13060.9-00 1,200W 120VAC,50/60Hz Fan Heater with thermostat 16A +32 to +140°C 13060.9-01 1,200W 120VAC,50/60Hz Fan Heater without thermostat 16A –
1) At 20°C(68°F) ambient temperature
- [download id=”142″ format=”1″]
If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.